SZSW1802 Emergency Lighting Drones

1. Flight control module

Material: aviation aluminum-magnesium alloy

Module size: 138mm*87mm60mm

Module weight: 790g±10%

Rated output power: 750W

Rated input voltage: 220VAC.50hz

Rated output voltage: DC26V+1V

Height: ≥50 meters

Interface compatibility: the interface is compatible with DJI TB50 smart battery interface

Installation method: Replace TB50 smart battery and insert directly

Power supply mode: self-contained battery power supply, continuous flight for more than 25 hours

Continuous flight time: ≥24 hours (extra load, tethered power supply mode)

Power-off protection function: During the flight of the UAV, when the ground power supply is interrupted abnormally, the UAV can fly and land normally

Differential pressure protection function: The pressure difference between the backup battery and the tethered module is too high, and the software interface will give an alarm prompt

High and low temperature working environment: 

Low temperature: -20°C normal operation:                                     

High temperature: +60°C normal operation 

Continuous working temperature rise: not higher than 60℃ for 2h

2. Lighting parameters

Weight:<800g

Lighting range:>3000㎡

Thermal conductivity: 2W(M2.K)

Input voltage: DC24V

Rated power:>400W

Protection class: IP54

Working temperature: -20°C~45°C

Luminous flux:>60000

3. Mooring cables

Rated voltage: 600V(DC)

Withstanding voltage: ≥2.5KV (DC) without breakdown phenomenon 

(60S)

Insulation resistance: 1.5x102M Ω.KM

DC resistance:≦49.50/km@20℃

Unit weight≤21g/M±1

Rated working temperature: 105℃

Minimum ambient temperature: -40°C